COMPANY HEADER
Request Information
Quickly and easily remove tough slag and dross build-up from your laser support surface. The Slaghog® works on Copper as well as Steel support slats and can be operated on the unused laser bed while the machine is running. Perform cleaning from one side of cutting bed with a single operator.
Unit of Measure

Specifications

Brands

 N/A Slaghog® SlatPro™

Slat Spacing Type

 N/A Standard

Cutter Size

 N/A 7 gauge10 gauge11 gauge12 gauge14 gauge3/16 in1/4 in

Technical Specifications

Current

 N/A 7 A

Voltage

 N/A 120 V

Phase

 N/A Single

Weight

 N/A 44 lb

Overall Length

 N/A 87 in

Slat Thickness

 N/A 0.075 to 0.250 in

Slat Length

 N/A 49 to 80 in

Minimum Spacing between Slats

 N/A 1.75 in

Slat Spacing

Slat Spacing

 N/A Two versions are available for either standard slat or narrow slat spacing.

Both versions are physically similar with the Standard Slat Slaghog® having larger diameter cutters and the Narrow Slat Slaghog® having smaller 1 inch cutters to fit between narrow spaced slats.

  • Slat Cleaning can be performed on unused bed during machine operation.
  • Cleans a standard bed in approximately 15 min.
  • For use on most manufactures laser machines.
  • Dual cutters lift slag from both sides of the slats.
  • Changing the cutters accommodates different slat thicknesses.
  • Simple to start and stop: may be turned on or off at motor box or end of handle.
  • Resettable over-current protection.
  • Integrated wheels allow for quick use when placing on machine.
  • Stores in upright position.

Operation

Operation

 N/A Slag Removal Tool for use on laser cutting machines

The tool is moved along the slats on the bed of a laser machine to remove slag that accumulates while cutting. Rotary cutting tools ride on each side of the slat to lift and remove the slag. It may be used on steel, copper or hybrid steel/copper slats. When not in use it may be rolled along the floor and stored in the upright position.

Initial Assembly
The Slaghog® ships in two pieces; power unit and the handle assembly. All fasteners are metric.
  • Remove the acorn nuts and button head socket screw from the 1.36" diameter stub on the power unit.
  • Slide the handle on the stub with the power out cord of the handle on the same side as the plug in on the power unit.
  • Plug the power cord into the power unit.
  • Do not plug into power before verifying the switches on the handle and power unit are off: rocker switches to O.
Operation
  • Before plugging into power verify that the two switches are turned off.
  • Wear work gloves and safety glasses when operating.
  • Lift onto the machine with care. Use extreme care near the cutters. Do not touch them unless the tool is unplugged.
The cutter geometry is ideal for most slat/pallet bed configurations. If the fit of the cutters slats does not seem correct contact the factory to find out options that are available.

Accessories

Accessories

 N/A 66145 - Slaghog® Narrow Slat Replacement Cutters for 11 gauge slat (Cutter set of 2)

66031 - Slaghog® Standard Slat Replacement Cutters (Cutter set of 2)
Size - For 11 gauge (0.119") and 12 gauge (0.104") Slats

66106 - Slaghog® Standard Slat Replacement Cutters (Cutter set of 2)
Size - For 14 gauge (0.75") Slats

66105 - Slaghog® Standard Slat Replacement Cutters (Cutter set of 2)
Size - For 10 gauge (0.135") Slats

66095 - Slaghog® Standard Slat Replacement Cutters (Cutter set of 2)
Size - For 7 gauge (0.179") to 3/16" Slats

66096 - Slaghog® Standard Slat Replacement Cutters (Cutter set of 2)
Size - For 1/4" Slats

67067 - Slaghog® Standard Slat Replacement Cutters (Cutter set of 2)
Size - For Long Cutter 11 gauge

66123 - 7A Circuit Breaker - For use on 66100 SH1

67064 - On/Off Breaker Switch 7A - For use on 67054 SH2

66125 SET - Brush Set for Slag Hog motor

Additional Information

Additional Information

 N/A We are currently experiencing longer lead times.
Free Shipping Nationwide
Cleans a Standard Bed in 15 Min.
Interchangeable Cutters

Note

Note

 N/A Long Cutter for 11 gauge